Model 3 Mobile Harbor Cranes

The entry model in the 100-ton class

?
The Konecranes Gottwald Model 3 Mobile Harbor Crane is the entry model in our family of medium-sized cranes. Designed for general requirements, this crane has load capacities up to 100 t, a maximum working radius of 46 m and lifting speeds of up to 120 m/min. It is a two-rope crane available in a number of variants, used for container handling and general cargo handling with ships up to standard class. The maximum lifting capacity of 100 t also makes heavy-load lifting possible. When equipped with motor grabs, it can also load and unload bulk carriers up to Handysize.?
?
The Model 3's compact construction is achieved by accommodating the diesel generator and control units in preconfigured containers that are weather-protected, sound-proofed and air-conditioned. It incorporates our proven, low-maintenance three-phase technology which simplifies the application of energy-saving technologies.
Variant Maximum lifting capacity [t] Hoisting speed [m/min] Hoist configuration Diesel engine nominal output (PRP, ISO 8528) [kW]
G HMK 3405 (standard variant) 100 / 47 0 – 120 1 x 2 = one 2-rope hoist 695
G HMK 3405 (general cargo variant) 100 / 47 0 – 100 1 x 2 = one 2-rope hoist 695

Options

The Model 3 crane is equipped with a standard range of features that improve productivity and eco-efficiency for economical, sustainable cargo handling in ports and terminals.

We also offer a range of optional, special features such as:

  • Load guidance system, including:

???? - linear load motion
???? - load antisway
???? - point-to-point handling mode
???? - hoisting height limiting system

  • Tandem lift assistant and vertical lift assistant
  • Verifiable weighing system

The use of energy-efficient hybrid drive units or external power sources significantly improves the efficiency of the drive system and helps reduce the environmental impact.

All variants
DIMENSIONS AND WEIGHT
Radius 10.0 – 46.0 m
Boom pivot point 16.3 m
Tower cab (crane operator eye level) 18.7 m
Propping base 12.0 m x 12.0 m
Chassis in travel mode 16.0 m x 9.0 m
Weight (approx.) 300 t
HOISTING HEIGHTS
Above quay level 42.0 m
Below quay level 12.0 m
TRAVEL GEAR
Axles 5
Steered axles 5
Driven axles 2
Crab steering 25°
WORKING SPEEDS
Slewing 0 – 2.0 rpm
Luffing 0 – 80 m/min
Traveling 0 – 80 m/min
Port Services Overview

Konecranes Port Services

From a single piece of equipment to entire operations, Konecranes supports you in port lifting.